Graco 8483 User Manual
Page 27
27
1. Place car seat firmly against the back of a
forward-facing vehicle seat equipped with
a lap/shoulder belt only.
2. If you want to use tether to hold seat in
place, secure it now. See Section 8.1
Using the Tether, page 28.
3. Place child in car seat with child’s back flat
against back of car seat.
4. Position lap/shoulder
belt as shown
. Fasten
buckle and pull up on the
shoulder belt to tighten.
5. If belt lays across child’s
neck, head or face, redirect
belt across chest using the
shoulder belt positioner.
Thread vehicle shoulder belt
through positioner exactly
as shown
.
Adjust positioner as high as
possible without shoulder
belt touching child’s neck.
To adjust, unhook bottom
of positioner, slide up or
down to desired height and
thread bottom hook into
closest loop below.
6. Check that shoulder belt is
properly positioned over
shoulder and snug against child.
7.2 Securing Child and Booster
Seat in Vehicle