GE 168951 - Manual (Page 5)

5
Flat Beaters and Whisk
1. Make sure mixer is unplugged and
speed control is set to OFF.
2. Insert a beater or attachment into an
opening on the bottom of the mixer.
Push until it clicks into place. Repeat
with other
beater or
attachment.
Twisted Wire Beaters and
Dough Hooks
1. Insert the wire beater or the dough
hook with the
collar into
the opening
indicated by
the illustration
on the mixer.
2. Align tabs on the beater or dough
hook with the
slots in the
opening.
Push until it
clicks into
place. Repeat
with other
beater or
dough hook.
To Insert Attachments
Burst
Press and hold down the button for
additional power
at any speed.
NOTE: Do not use
Burst for more
than two minutes
at a time or
motor may
overheat.
Collar
Tab
Slot
840112700 ENv00 2/21/03 3:00 PM Page 5