Grizzly SOPRANO UKULELE KIT T10458 - Manual (Page 18)

-16-
Model t10458 (Mfg. Since 10/11)
preparing to finish
in preparation for applying the finish, we recom-
mend using masking tape to protect the following
parts of the ukulele.
• Mask the bridge mounting location, (see
figure 28).
• Mask the fingerboard and nut location, (see
figure 29).
• Fill the sound hole with newspaper, (see
figure 29).
Carefully press all the masking tape edges secure-
ly to the ukulele pieces. the finish coat can seep
under these edges, especially near corners,
uneven edges, and where the frets meet the fin-
gerboard.
note: Failure to correctly mask these areas could
result in irreparable damage to the ukulele.
figure 29. example of a masked fingerboard
and stuffed sound hole.
figure 28. Masked off area for bridge.
Masked area
Bridge
Footprint
painting/finishing
Finishing supplies are not supplied with the uku-
lele kit.
tip: The ukulele body is made from mahogany.
Clear finishes such as lacquer look exceptionally
stunning and glossy on this wood.
painting/finishing tips:
• Always work in a well ventilated area
when using finishing materials.
• Wear an approved respirator mask and
safety glasses when using finishing mate-
rials!
• Fabricate hooks from metal hangers to sus-
pend the ukulele components during the fin-
ishing process.
• Several thinner coats usually produce a nicer
finish than one heavy coat.
note: Always follow the finish manufacturer’s
instructions.
• Dust particles suspended in the air will settle
on wet finishes, resulting in less than satis-
factory results. to avoid this problem:
1. have the ukulele components positioned
for the finish application upon entering the
room.
2. leave the room where the finishing will
take place completely undisturbed for 24
hours prior to applying the finish.
3. avoid making unnecessary movements
upon entering the finish room.
4. apply the finish to the desired ukulele
parts and immediately leave the finish
room.
5. Do not return to the room until the spec-
ified drying time has elapsed.