GMC Traverse - Manual (Page 16)

Finding a Station
There are three ways to find/change
stations:
• If viewing a full map screen,
use the
¨ © SEEK keys
and f knob. Preset stations
cannot be directly changed from
the full map screen, but can be
selected by using the steering
wheel control
w or x buttons.
The station will display at the top
for the screen.
• If viewing a full map screen,
select the source screen
(AM, FM, XM, CD, etc.) button.
The display splits between
the audio screen and the map
screen. All station-changing
functions can be performed from
this screen.
• If you do not want to view a split
screen or you are not on a map
screen, press the AUDIO hard
key to enter the audio menu
screen.
AM/FM/XM: Select the source
(AM, FM, or XM, if equipped) screen
button or press the AUDIO key
repeatedly until the desired source
is selected.
Category:
1. Select the screen button, located
in the middle of the screen, to
receive a list of all of the selected
band stations in the area.
2. Use the up and down arrow
screen buttons to scroll the
frequencies.
3. Select the desired frequency.
AM source shown, other
sources similar
FM source shown, other
sources similar
FM source shown, other
sources similar
16 Infotainment System