GE VG4252 - Manual (Page 24)

22
Recording a Program
One Touch Recording
One touch recording lets you record up to four hours without using the timer
program feature. The VCR will turn off automatically at the end of the recording.
CHANNEL CHANNEL
TRACKING INPUT TV • VCR
TRACKING
POWER EJECT
STOP
FWD REW
RECORD PAUSE
PLAY
R E C
S L P
T I M E R
V C R
RECORD Display showing 40 minutes
remaining for recording.
1. Turn on the VCR.
2. Insert a tape with safety tab in place.
3. Select the channel you want to record.
4. Select the desired recording speed using SPEED on the
remote.
5. Press RECORD to activate recording.
6. Press RECORD repeatedly until the amount of recording
time for the program is displayed in the VCR’s display
panel or on the TV screen.
Each press increases the time — 30 minutes up to 4 hours.
The amount of time the VCR will record and the
D
and
indicators appear in the VCR’s display panel.
Stopping a Recording in Progress
You can stop a recording by:
• Pressing and holding the STOP button on the remote or
STOP•EJECT on the VCR for approximately three seconds.
• Pressing the RECORD button until 0:00 is displayed for the
recording.
TIMER
Rec Ch 04
Record Length 0:00
Press REC to set length
Display on TV Screen
Press Recording
RECORD Time
0:30 ( 30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
0:00 (Recording Turns Off)