GIGABYTE GIGAFAST GE 2000-N User Manual
Page 22
Q: Can I directly connect my GE 2000-N to another network adapter on a different
computer to do a pier to pier connection?
A: To accomplish this, you have to set up a static IP address on each computer. A CAT5/RJ45
crossover cable should be connected in between of the computers. To set up a static IP
address:
1. Go to TCP/IP protocols under Local Area Connections and click on ‘properties’
2. ‘Obtain an IP address automatically’ should be bubbled in by default. Bubble ‘Specify an
IP address’ and put in 192.168.0.1 for the first computer and 192.168.0.2 for the second
vise versa
3. Mask addresses should be 255.255.255.0 on all systems within the network
4. After the changes have made, make sure you do a ping test to see if the computers are
communicating with each other.
Q: Is there a way to boost the speed of my Ethernet card so my internet
connection can download/upload faster?
A: It is not the network card that determines how much bandwidth you receive or send.
Whether, it is the ISP’s decision that is within your area.
22