Gefen CAT-5 DA - Manual (Page 10)

Connecting and Operating the 1x8 Component CAT5 DA
How to Connect the 1x8 Component CAT5 DA to your devices
1 Connect the supplied VGA to Component cable from the Component video source into
the 1x8 Component CAT5 DA Sender "Comp In" port.
2 Connect a CAT-5e* cable from the "CAT5 Video Outs" on the 1x8 Component CAT5
DA Sender to the "CAT5 Inputs" on the Component CAT5 Distribution Receiver. (Repeat
for each Receiver unit)
3 Connect the VGA to Component cable from the display to the "Comp Out" on the
Component CAT5 Distribution Receiver. (Repeat for each Receiver unit)
4 Plug the 5VDC power supply into the 1x8 Component CAT5 DA Sender.
6