Gemini MM-01 4U 19" - Manual (Page 4)

INTRODUCTION:
Congratulations on purchasing a Gemini MM-01 4U 19",
4 channel, rack mounted club mixer. This state of the
art mixer is backed by a three year warranty, excluding
crossfader and channel slides. The crossfader and chan-
nel slides are backed by a separate 90 day warranty. Prior
to use we suggest that you carefully read all the instruc-
tions.
FEATURES:
- 4U 19" Rack Mounted Club Mixer
- 4 Stereo Channels
- 7 Line, 2 Mic, 2 Convertible Phono/Line, RCA Inputs
- 5 Band Master Graphic EQ
- Fully Removable, User Replaceable Rail Glide Cross Fader
- Dual Display with Bright LED
- XLR Mic Input with 2 Band Rotary EQ Control
- Rotary Mic Volume Control
- Auto Talk-Over Feature
- Push-Button Cueing with Cue/PGM Fader Control
- Master and Record RCA Outputs
- Top Located 1/4" Headphone Input
CAUTIONS:
1. All operating instructions should be read before using
this equipment.
2. To reduce the risk of electrical shock, do not open the unit.
Please refer servicing to a qualified service technician.
3. Do not expose this unit to direct sunlight or to a heat
source such as a radiator or stove.
4. This unit should be cleaned only with a damp cloth.
Avoid solvents or other cleaning detergents.
5. When moving this equipment, it should be placed in its
original carton and packaging. This will reduce the risk of
damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOIS-
TURE.
7. DO NOT USE ANY SPRAY CLEANER OR LUBRI-
CANT ON ANY CONTROLS OR SWITCHES.
CONNECTIONS:
1. Located on the rear panel is the 15V AC (1) adapter jack,
used to plug in the power cord. Before plugging the
adapter in, make sure the POWER SWITCH (39) located
on the face panel is turned off.
2. The MM-01 has 2 Main RCA compatible outputs,
MASTER (2) and RECORD (3). Use the RCA to connect
the MASTER (2) output jacks to the main amplifier. The
RECORD (3) output jacks can be used to connect the
mixer to the record input of your recording unit, thus
enabling you to record your mix.
3. Located on the rear panel are 2 Phono/Line convert-
ible RCA inputs (8,9), and 5 line RCA inputs (12, 13, 11,
10, 4). The convertible RCA inputs (8, 9) for Channels
(CH) 2(28) & 3(31) allow Phono (PH) and Line (LN) level
equipment to be connected to the mixer. To adjust the
converter(s) (6, 7), just flip the switch(es) up to operate
PH 1 or PH 2.
Flip the switch(es) down to operate through LN 2 or LN
4. The PH INPUTS only accept turntables with a magnet-
ic cartridge. When using (a) turntable(s), you will need to
ground the RCA cable(s) by screwing in the grounding
fork(s) to the GROUNDING SCREW (5) located in the
rear panel of the MM-01 mixer. This is located in between
the CONVERTER SWITCHES (6,7). The STEREO LN
INPUTS only accept line level inputs such as a CD, DAT,
MiniDisc, etc.
NOTE: Not attaching a ground may cause a system "hum."
4. Headphones may be plugged into the face-plate located
1/4" HEADPHONE (20) JACK.
5. The MIC 1 (15) input (located on the face panel) accepts
an XLR connector. The MIC 2 (14) input (on the rear
panel) accepts 1/4" connectors. Both accept balanced
and unbalanced microphones.
OPERATION:
Once all of your connections have been in the rear panel,
turn on the mixer by pressing the POWER SWITCH (39).
1. CHANNEL 1: To bring this channel in to program output
(PGM), you must first decide which line will be in use. Use
the LNSWITCH (23) to toggle from LN 1 (4) to Mic 2 (14)
on this channel. Slowly raise the CH1 SLIDE CONTROL
(25) to a comfortable level, once you've selected the
proper line.
2. CHANNEL 2: To bring this channel in to PGM, you must
first decide which line will be in use. Use the LN SWITCH
(26) to toggle from PH 1/LN 2 (8) to LN 3 (10) on this
channel. Slowly raise the CH 2 SLIDE CONTROL (28) to
a comfortable level, once you've selected the proper line.
3. CHANNEL 3: To bring this channel in to PGM, you must
first decide which line will be in use. Use the LN SWITCH
(29) to toggle from PH 2/LN 4 (9) to LN 5 (11) on this
channel. Slowly raise the CH 3 SLIDE CONTROL (31) to
a comfortable level, once you've selected the proper line.
4. CHANNEL 4: To bring this channel in to PGM, you must
first decide which line will be in use. Use the LN SWITCH
(32) to toggle from LN 6 (12) to LN 7 (13) on this channel.
Slowly raise the CH 4 SLIDE CONTROL (34) to a com-
fortable level, once you've selected the proper line.
5. EQUALIZER: This unit features 5 BAND GRAPHIC
EQUALIZER (35) that will allow you to adjust the sound
to fit any room. By adjusting any of the 5 EQUALIZER
SLIDE CONTROLS (35), you can cut or boost the tonal
characteristics of the sound coming from PGM to the
speaker by ±12 dB.
6. OUTPUT SELECTION CONTROL: Once you are com-
fortable with the sound level of your music you may adjust
the volume with the MASTER VOLUME SLIDE CON-
TROL (36).
7. CUE: By connecting a set of headphones to the HEAD-
PHONE (20) jack, you can monitor any or all channels.
Press the CUE buttons (24, 27, 30, 33) for CH 1 through
8. CH 4 to assign the Channel(s) to be monitored. The
respective CUE LED indicators will glow when in use.
Use the CUE ROTARY CONTROL (21) to adjust the cue
volume without changing the overall mix. By moving the
CUE/PGM FADER CONTROL (22) to the LEFT you will
be able to monitor the assigned cue signal. Moving the
control to the RIGHT allows you to monitor PGM output.
Moving the control to the MIDDLE allows cue mix with
PGM.
In the USA ~ if you experience problems
with this unit call Gemini Customer Service at: 1
(732) 738-9003. Do not attempt to return this equip-
ment to your dealer.
(4 4)