Graco PM-1373AD - Manual (Page 30)

Removing Seat Pads:
If using harness system, remove harness system
(see “Harness System - removing and
re-assembly” section).
Turn car seat upside down:
Using a screwdriver, pry metal rod loose from
car seat shell and slide elastic off.
CAUTION: Be careful not to damage webbing
with screwdriver. Rod can be re-installed by
pressing firmly or tapping with hammer.
Turn car seat upright:
Unhook elastic from “J” hooks and pull seat pad
off.
Removing Armrest Pads:
Pull attachment strips apart and pull armrest
pads off.
Reverse above steps for replacing seat pad,
armrest pads and harness system.
❃
Care & Cleaning
28
1
2
3
1
2
2
ADDITIONAL INFORMATION
(continued)
3