GIGABYTE AirCruiser GN-BR30N-RH - Manual (Page 70)

GN-BR30N-RH 2.4GHz AirCruiser N300 Wireless Router
64
Appendix D
Troubleshooting
Problem 1:
Cannot connect to the Router’s Web-based Utility.
Response:
•
Make sure that your Router uses DHCP, and make sure your
PC’s IP address is on the same subnet as the router.
•
Check to see if your web browser is automatically detecting
LAN settings.
•
Try closing all web browsers and trying again.
Make sure that your Router uses DHCP, and make sure your PC’s IP
address is on the same subnet as the router.
Step 1
Click the Start button. Select Run, then type “command”. Press OK.
Step 2
At the command prompt, type “ipconfig /release” and press the
ENTER key.
Step 3
At the next command prompt, type “ipconfig /renew” and press the
ENTER key.