Garmin zumo 665 - Manual (Page 51)

zūmo 665 Owner’s Manual 
Appendix
Problem/Question Solution/Answer
How do I know my
zūmo is in USB mass
storage mode?
When your zūmo is in USB mass storage mode, a picture of a zūmo connected to a computer is shown. Also, you should see two
new removable disk drives listed in My Computer .
My computer never
senses that the zūmo is
connected.
1. Unplug the USB cable from your computer.
2. Turn the zūmo off.
3. Plug the USB cable into your computer and your zūmo. The zūmo automatically turns on and goes into USB mass storage
mode.
I cannot see any new
removable drives in my
list of drives.
If you have several network drives mapped on your computer, Windows may have trouble assigning drive letters to your zūmo
drives. See the operating system Help file to learn how to map/assign drive letters.
I cannot get traffic
information.
Verify that you are in a coverage area. You must be in a coverage area to get the traffic information for that area.
Verify that the FM TMC Traffic receiver is connected to the power connector on the cradle and also connected to a power outlet in
your vehicle.
How can I find
restaurants near the
hotel I will be staying at
in the future?
1. Touch Where To? > near > Different City (and enter your vacation destination).
2. Find the hotel and touch go! .
3. Touch Menu > Where To? > near > My Destination .
4. Search for a restaurant. Restaurants nearest to your hotel are listed first.
How can I find my
vehicle in a parking lot? Touch
Where To? > Favorites > Last Position > go! . Navigate to your vehicle!