GE WSLP1500 - Manual (Page 14)

14
Installation Instructions
WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1500—
ONE-FAUCET CONNECTIONS (CONT.)
MAKE SURE THE TEMPERATURE
SELECTOR IS SET AT COLD/COLD 6
SLOWLY TURN ON THE WATER
FAUCET ALL THE WAY TO THE
DESIRED TEMPERATURE SETTING 7
PLUG THE POWER CORD INTO A
3-PRONG GROUNDED OUTLET 8
Insure proper ground
exists before use
The electrical power cord is on the back of the washer.
REMOVE THE PROTECTIVE FILM
COVERING THE CONTROL PANEL 9
INSTALLATION CHECKLIST 10
Before starting the washer, check to make sure:
❏ Main power is turned on.
❏ The washer is plugged in.
❏ The water faucets are turned on.
❏ The unit is level.
❏ There are no leaks at the faucet, drain line
or washer.