Electrical requirements, Grounding instructions, Leveling the washer – GE WSLP1500 User Manual

Page 10: Electrical requirements grounding instructions, Installation instructions, Leveling the washer— stationary models, Caution, Danger

Advertising
background image

10

CAUTION:

For personal safety, do

not use an extension cord or adapter plug with this
appliance.

Do not, under any circumstances, cut or remove the
third grounding prong from the power cord. Follow
National Electrical Codes or prevailing local codes
and ordinances.

This appliance must be supplied with the voltage and
frequency indicated on the rating plate (located on the
back of the washer) and connected to an individual,
properly grounded branch circuit, protected by a
15- or 20-amp circuit breaker or time-delay fuse.

If the electric supply provided does not meet the above
requirements, call a licensed electrician.

ELECTRICAL REQUIREMENTS

Installation Instructions

This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least
resistance for electrical current.

This appliance is equipped with a cord having an
equipment grounding conductor and a grounding plug.

The plug must be plugged into an appropriate outlet that
is properly installed and grounded in accordance with all
local codes and ordinances.

DANGER:

Improper connection of the

equipment-grounding conductor can result in a risk of
electrical shock. Check with a qualified electrician if you
are in doubt as to whether the appliance is properly
grounded.

Do not modify plug with this appliance; if it will not fit
the outlet installed, have a proper outlet installed by
a qualified electrician.

Insure proper ground
exists before use

CAUTION:

Before plugging in washer, read the following electrical requirements.

GROUNDING INSTRUCTIONS

Before connecting the hoses, the washer must be level.
Leveling locks are located at the bottom front of the left
and right sides of the washer.

LEVELING THE WASHER—
STATIONARY MODELS

MAKE SURE THE WASHER IS IN ITS
FINAL LOCATION

1

PULL OUT THE LEVELING LOCKS

2

This releases the spring loaded leveling feet.

The washer will automatically level itself.

PUSH THE LEVELING LOCKS BACK IN

3

Do not kick or step on the leveling locks.

Advertising
This manual is related to the following products: