Washer connections for portable model, Washer connections for portable model –16 – GE WSLP1500 User Manual

Page 13

Advertising
background image

13

Hose Connector

Locking Collar

Uni-Coupler Hose

Faucet Connector

Drain Connection

COLD Water
Supply Connector

Water Filter

Installation Instructions

WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1500—
ONE-FAUCET CONNECTIONS

REMOVE THE UNI-COUPLE

®

HOSE

FROM INSIDE THE WASHER BASKET

1

CONNECT TO WATER LINE

2

Use the hose connector provided with the washer for a
one-faucet connection.

TO CONNECT THE WASHER:

Attach the hose connector to the faucet adapter by
pulling down on the locking collar while lifting up on
the connector until it snaps into place. Make sure the
water filter provided is in place.

CONNECT TO VALVE INLET

3

Attach the COLD water supply connector to the COLD
water valve inlet (color BLUE). Make sure the washer is
inside the connector before tightening.

TIGHTEN CONNECTOR

4

Tighten the connector, ensuring the threads are
aligned properly for tightest fit. Inspect for kinks
or binding of the hose.

NOTE: Do not remove the plastic cap from the HOT
water inlet for uni-coupler connections as leakage may
occur.

Plastic Cap

CONNECT DRAIN HOSE

5

Attach the drain hose to the rear of the washer. Install
the clamp on the drain hose and tighten to prevent
leakage of water.

Advertising
This manual is related to the following products: