Gefen EXT-HDMI-5BNC - Manual (Page 5)

READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE HDMI OVER RGB
• The HDMI Over RGB is designed for either 4 or 5 BNC cable type setups.
When 5 BNC cables are present and used, a power supply on the HDMI
Over RGB Receiver will not need to be used. Power will be transmitted over
the cables. When a 4 BNC cable setup is used, a second power supply
(part# EXT-PS52AU) for the receiving unit will need to be purchased and
connected.
• HDMI 1.3 compliant. Please see page 3 for a listing of supported HDMI 1.3
features.
• HDCP compliant.
• The HDMI Over RGB has an IR repeater feature that will send standard
IR remote control commands from the receiver back to the sender. This
is useful for controlling equipment from a remote location. IR commands
cannot be relyed from the sender to the receiver. Please see page 8 for
more details.
• Resolutions of up to 1080p Full HD are supported for HDTV use.
• Resolutions of up to 1920 x 1200 are supported for computer use.
• The HDMI Over RGB was designed for use with 75Ω coaxial cable.
2
OPERATION NOTES