GIGABYTE GZ-FSCA1-AN - Manual (Page 12)

12
English
4-4-3 Insert the Audio connector into the corresponding socket on the motherboard.
Pin Definition Pin Definition
1 MIC 6 Rear Audio (R)
2 GND 7 Reserved
3 REF 8
4 POWER 9 Front Audio (L)
5 Front Audio (R) 10 Rear Audio (L)
(2) Basic casing power switch control cable kit.
Follow the connectors listed below for installation (see the figure below).
Connector Color
Speaker
Red(+) / Black(-)
Reset SW Green(+) / White(-)
Power SW Red(+) / White(-)
POW LED+ Black
POW LED- White
H.D.D. LED Brown(+) / White(-)
4-5 Casing’s Internal Structure
The 3D AURORA is equipped with one 12cm silent LED cooling fan at front / two at rear.
Required tool: None
Be sure to remember that different motherboards may have different installation
positions. For detailed instructions, please refer to the instructions supplied by the
motherboard manufacturer.
4-5-1 Plug the front fan 4-pin power cable into the 4-pin
connector on the motherboard.
4-5-2 Plug the rear fan 3-pin power connector into the fan
power connector of the motherboard system.