Garrett Metal Detectors Metal Detector GTI 1500 - Manual (Page 10)

Inspect contents of the clear plastic enve-
lope (see above).
• One (1) knob
• Two (2) Washers
• One (1) threaded bolt
1. Attach the lower stem to the 9.5” imag-
ing searchcoil. Make certain that the two
rubber washers are inserted onto the
lower stem before slipping the searchcoil
onto it.
Place the threaded bolt through the holes
in the connector and hand-tighten using
the remaining wing nut. Use no tools. (See
image A on page 11.)
10 - Garrett Metal Detectors