Graco 7420 User Manual
Page 75
43
7.3 Cleaning and Maintenance
!
TO REMOVE AND WASH INFANT RESTRAINT PAD, follow
instructions in “6.1 Positioning Harness Straps”, p. 27-30.
On 5-point harness models,
push aside the small tab that
holds the anchor buckles in
place
"
and pull the anchor
buckles out of their indentations.
Push a corner of each anchor
buckle back into its slot
#
.
Carefully remove the seat pad.
Machine wash on delicate cycle
and drip-dry. DO NOT USE BLEACH.
Reverse steps to reinstall seat pad. Check that harness system is not
twisted, and pull on harness system to be sure harness is securely
reinstalled.
!
INFANT RESTRAINT METAL AND PLASTIC PARTS may be
cleaned by wiping with a mild soap and water solution. DO NOT USE
BLEACH. Use of bleach may weaken plastic parts.
!
HARNESS STRAPS may be spot cleaned or replaced. DO NOT
IMMERSE THE HARNESS STRAPS IN WATER. Doing so may weaken
the harness straps.
!
BUCKLE may be cleaned with a damp cloth.
!
DO NOT LUBRICATE the buckle.
!
DO NOT USE INFANT RESTRAINT without seat pad.
#
"