MIDLAND WR300 - Manual (Page 13)

WR300 Owner’s Manual
Page 13 www.midlandusa.com
Testing the Alert:
To test the alert function to ensure it is working, press the “MENU” button, then press the “UP”
arrow until “SIREN TEST” is displayed. Press the “SELECT” button to sound the alert siren.
Press the “SELECT” button again to silence the alarm.
Reviewing Alerts:
The WR300 weather radio can store 10 different alerts (with overlapping effective times) in its
memory. If the radio receives a new alert while a previous alert is still in effect, it automatically
displays the new alert description. To review past alerts that are still in effect, press the “DOWN”
arrow to scroll through the last 10 alerts. If an alert is expired, it will be marked “EXP.”
Test Signals Broadcast by NWS:
All National Weather Service stations periodically transmit test signals. You can find out when
your local NWS station broadcasts test signals by calling the NOAA National Weather Service
Forecast Office (listed under “Weather” in the Federal Government section of the telephone
book).
During the weekly test signal, the local NWS station will give a list of counties covered by their
transmitter. The NWS test signal allows everyone with weather radio receivers to verify the oper-
ation of their equipment.
The following test signals may be sent by the NWS during testing: required weekly test,
required monthly test, system demo, and national periodic test.
No Reception Warning:
If no alerts are received for 10 days, the display will flash “CHECK RECEPTION” every 30 sec-
onds. If this happens, check your channel settings and county codes for setting errors. If you
receive a clear signal from the NWS, try using the “ALL” county code setting to receive all alerts
for all counties.
Note: If you have trouble finding reception, please move your radio closer to a window and away
from fluorescent lighting.