Metrologic Instruments MS7120 Series - Manual (Page 28)

24
Troubleshooting Guide (continued)
SYMPTOMS POSSIBLE CAUSE(S) SOLUTION
Scanner beeps at The print quality of the bar Check print mode. The type of printer
some bar codes code is suspect could be the problem. Change print
and NOT for settings. For example change to econo
others of the mode or high speed
same bar code
symbology
Scanner beeps at The aspect ratio of the bar Check print mode. The type of printer
some bar codes code is out of tolerance could be the problem. Change print
and NOT for settings. ie change to econo mode or
others of the high speed
same bar code
symbology
Scanner beeps at The bar code may have Check if it is a check digit/character/or
some bar codes been printed incorrectly border problem
and NOT for
others of the
same bar code
symbology
Scanner beeps at The scanner is not Check if check digits are set properly
some bar codes configured correctly for
and NOT for this type of bar code
others of the
same bar code
symbology
Scanner beeps at The minimum symbol Check if the correct minimum symbol
some bar codes length setting does not length is set
and NOT for work with the bar code
others of the
same bar code
symbology