Madge Networks 802.11b - Manual (Page 16)

Fig. 13. TFTP Server.
TIP: It's more convenient to use the Firmware Upgrade Wizard of Wireless Network Manager to upgrade
the firmware of an advanced AP. See section 4.
NOTE: After the dialog box of the TFTP server program appears, be sure to specify the working folder
within which the downloaded firmware files reside.
NOTE: The LAN IP address of the advanced AP and the IP address of the TFTP server must be in the
same IP subnet for TFTP to work.
NOTE: Due to the nature of wireless media, it’s highly recommended that the TFTP server and the to-be-
upgraded advanced AP be connected by Ethernet, and on the same LAN, so that the upgrade process will
be smooth.
NOTE: After the firmware is upgraded, be sure to delete the contents of the Web browser cache, so that
the Web management pages can be shown correctly.
NOTE: A failed upgrade may corrupt the firmware and make the advanced AP unstartable. When this
occurs, call technical support.
3.3 Configuring TCP/IP Related Settings
3.3.1 Addressing
Fig. 14. TCP/IP settings.
100-408-01 Copyright © 2002 Madge Networks. All rights reserved. Page 12