Miele DA2280 - Manual (Page 31)

Installing the joystick
^ Insert the lower half of the desired
joystick into the socket, loosely
secure it in place with the included
screw and spring washer.
The screws have different lengths.
Make sure the respective screw for
the desired joystick is used.
^ Turn the printed part of the joystick
so that the m-symbol faces front.
^ Tighten the screw with an allen
wrench. At the same time hold the
joystick with a wrench.
Joystick extension
The joystick can be extended for an
easier reach.
^ Place a spring washer between the
joystick base and the extension.
Tighten the extension by hand while
holding the joystick base with a
wrench.
^ Attach the lower part of the joystick to
the extension with a spring washer.
Turn the m-symbol to the front and
screw in place with an allen wrench
while using a wrench to hold the
joystick base.
Installation
31