Philips Magnavox ZV427MG9 - Manual (Page 13)

13 EN EN
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
VCR Functions
Others
Español
FUNCTIONAL OVERVIEW
1. STANDBY-ON y y button (DVD/VCR)
• Press to turn on the unit, or to turn the unit to the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord.)
2. Number/Character buttons (DVD/VCR)
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the main menu.
• Press to enter title names.
• Press to start the index/time search in VCR mode.
3. DISPLAY button (DVD/VCR)
• Press to display the display menu on or off.
4. DISC MENU button (DVD)
• Press to display the disc menu.
5. OK button (DVD/VCR)
• Press to confirm or select menu items.
6. SETUP button (DVD/VCR)
• Press to display the main menu.
• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode
to the interlace mode.
7. VCR button
• Press to select the VCR output mode.
8. PREV
H button (DVD)
• During playback, press to return to the beginning of
the current chapter, track or file.
• When playback is in pause, press repeatedly to
reverse the playback step by step.
9. REW E button (DVD/VCR)
DVD mode:
• During playback, press to fast reverse playback.
• When playback is paused, press to slow reverse playback.
VCR mode:
• During playback, press to rewind the cassette tape
or to view the picture rapidly in reverse.
10. CM SKIP button (DVD)
• During playback, press to skip 30 seconds.
11. PAUSE F button (DVD/VCR)
• Press to pause playback or recording.
12. D.DUBBING button (DVD/VCR)
• Press to start VCR to DVD (DVD to VCR) duplication
which you set in the main menu.
13. REC MODE button (DVD/VCR)
• Press repeatedly to switch the recording mode.
14. SOURCE button (DVD/VCR)
• Press to select the appropriate input.
15. OPEN/CLOSE A button (DVD/VCR)
DVD mode:
• Press to open or close the disc tray.
VCR mode:
• Press to remove the cassette tape from the cassette
compartment.
16. TRACKING / buttons (VCR)
• Press to adjust the tracking during playback or in
slow motion of the cassette tape.
• While playback is in still mode, you can adjust the
picture blurred vertically.
17. HDMI button (DVD)
• Press to set the HDMI connector’s video signal out-
put mode.
18. CLEAR button (DVD/VCR)
DVD mode:
• Press to clear the password once entered or to can-
cel the programming for CD or to clear the selected
marker number, etc.
VCR mode:
• Press to reset the tape counter.
19. AUDIO button (DVD/VCR)
DVD mode:
• Press to display the audio menu during playback.
VCR mode:
• During playback of a Hi-Fi videotape, press to
change the audio out setting.
20. TIMER button (DVD/VCR)
• Press to display the timer programming list.
21. TITLE button (DVD)
• Press to display the title list.
22. Cursor K / L / { / { B buttons (DVD/VCR)
• Press to select items or settings.
23. RETURN button (DVD/VCR)
• Press to return to the previously displayed menu screen.
24. DVD button
• Press to select the DVD output mode.
25. PLAY B button (DVD/VCR)
• Press to start playback or resume playback.
26. NEXT G button (DVD)
• During playback, press to skip to the next chapter,
track or file.
• When playback is in pause, press repeatedly to for-
ward the playback step by step.
27. STOP C button (DVD/VCR)
• Press to stop playback or recording.
DVD mode:
• Press to exit from the title list.
28. FFW
D button (DVD/VCR)
DVD mode:
• During playback, press to fast forward playback.
• When playback is paused, press to slow forward playback.
VCR mode:
• During playback, press to rapidly advance the
cassette tape or view the picture rapidly in forward.
• When playback is paused, press to view the cassette
tape in slow motion.
29. RAPID PLAY button (DVD)
• During playback, press to play back in a slightly
faster/slower mode with keeping the audio quality.
30. SEARCH button (VCR)
• Press to call up the index or time search menu.
31. TIMER SET button (DVD/VCR)
• Press to set the unit in the timer standby mode. In
the timer standby mode, press to cancel the mode
and to turn the unit on.
32. REC button (DVD/VCR)
• Press once to start a recording.
• Press repeatedly to start the one-touch timer recording.
Note
• If you turn this unit to the standby mode, [OPEN/CLOSE
A] on the remote control is not available.
Be sure to use [ AOPEN/CLOSE] or [C A STOP/EJECT]
on the unit.