Motorola WR850GP - Manual (Page 80)

Configuration Section 3
WR850 3-47
Options related to:
ENSURING INTEROPERABILITY WITH WIRELESS DEVICES
Field Description
Wireless Enabled:
(ADVANCED)
Enables wireless operation on this interface.
Select
Yes or No.
FACTORY DEFAULT:
Yes
Country: Identifies the country name in which the wireless operation
parameters are set to comply with. Currently United States is the
only option.
FACTORY DEFAULT:
United States
Band: Sets which wireless radio band to use. 802.11g is the only option.
NOTE: The 2.4 GHz radio band supports both 802.11g and 802.11b
devices, unless you disable backward compatibility through
the setting of the Wireless Mode below.
FACTORY DEFAULT:
802.11g (2.4 GHz)
Channel: Sets which wireless channel to use (e.g., when Country (above)
is set to the United States, the available channels are numbered
1 through 11). If you encounter poor wireless performance due
to interference, you can switch the channel.
FACTORY DEFAULT:
11
Wireless Mode:
(ADVANCED)
Sets the compatibility mode for the wireless interface. You
should select the setting of this option based on the types of
wireless clients you are planning to use.
• Select Compatibility if using the WR850 with both
802.11g and 802.11b clients.
• Select Performance for best service if using the WR850
only with 802.11g clients (with no 802.11b “neighbors”).
• Select LRS if you are experiencing particular difficulty with
802.11b clients.
• Select 802.11b only for best service if using the WR850
only with 802.11b clients.
FACTORY DEFAULT:
Compatibility