Miele H 5460-BP - Manual (Page 56)

Problem Possible cause and remedy
"Max. operating
duration reached"
appears in the
display. Safety switch-off has activated.
The appliance will be ready for use again after it has been
switched off and then back on again.
A fault code
appears in the
display: F + a
number You can rectify the faults with the following codes yourself:
– Fault 23: The temperature required for pyrolytic cleaning
was not reached.
This could have been caused by too much soiling in the
oven to start with.
Remove all coarse soiling before starting the pyrolytic
cleaning programme again.
If the fault message appears again please contact the
Miele Service Department.
– Fault 32: The door has not locked for the pyrolytic
cleaning process.
Switch the oven off and start the pyrolytic cleaning
process again.
If the fault code appears again call the Miele Service
Department.
– Fault 33: The door lock for the pyrolytic cleaning process
will not open.
Interrupt the pyrolytic cleaning programme by switching
the oven off. If the door will still not open please contact
the Miele Service Department.
– Fault 54: The food probe is faulty.
The message will go out as soon as the food probe is
removed from the oven. A replacement can be ordered
from your Miele Dealer or the Miele Spare Parts
Department.
For all other fault codes please contact the Miele Service
Department.
Problem solving guide
56