Microsoft RAMCard C-97200 - Manual (Page 14)

upward or lateral force than necessary to remove the chip gently so
that the chip will not be damaged.
Inserting RAMCard
Inserting RAMCard is actually two separate procedures. First, you
insert the plug at the end of the connector cable into the socket left
empty when you removed the chip. Then, insert the card itself into Slot
0
Inserting The Plug
1 . E x a m i n e R A M C a r d .
Set the card in front of you, face up.
edge connector
connector cable
RAMCard
1 3