MSI 163C User Manual

Page 79

Advertising
background image

4-14

BIOS Setup

When the Supervisor Password is set, the new item User Access Level

and Password Check will be added in the menu. You can make further

settings of access right in the User Access Level item. Setting options:

No Access, View Only, Limited and Full Access. The Password Check

item is used to specify the type of BIOS password protection that is

implemented. Settings are described below:

Setup

The password prompt appears only when end users try

to run Setup.

Always

A password prompt appears every time when the

Notebook is powered on or when end users try to run

Setup.

To clear a set password, just press [Enter] when you are prompted to enter

the password. A message box will show up confirming the password will

be disabled. Once the password is disabled, the system will boot and you

can enter Setup without entering any password.

About Supervisor Password and User Password

Supervisor Password allows the user to enter and change the

settings of the setup menu; User Password only allows the user to

enter the setup menu, but do not have the right to make changes.

Advertising
This manual is related to the following products: