Mercedes-Benz 2003 M-Class - Manual (Page 237)

237
Practical hints
Where will I find ...?
Vehicle tool kit
The vehicle tool kit is stored in the cargo
area behind the right trim panel.
̈ Turn handles 1 90° in direction of ar-
rows.
̈ Fold down the panel 2.
3 Screw
4 Vehicle jack with tool kit
̈ Turn screw 3 counterclockwise.
̈ Remove vehicle jack.
Vehicles with CD-changer*
(
୴ page 238).
The jack is exclusively designed for lifting
the vehicle during a wheel change. Always
lower the vehicle on sufficient capacity
jackstands before working under the vehi-
cle.
1 Vehicle jack
2 Wheel bolt wrench
3 Screwdriver
4 Interchangeable slot
Screwdriver 3 is placed inside the wheel-
bolt wrench handle.