Memorex Flat Screen Tv - Manual (Page 20)

18
1
Use VOL+ or VOL- button.
Press VOL+ button, the volume increases;
Press VOL- button, the volume decreases.
2
If you want to mute the sound, press
MUTE button on the remote.
To resume the sound, press this
button again.
Notes:
Sound Control
26 VOLUME
26 VOLUME
4 You can also resume the sound by pressing VOL+ button.
4 If you mute the sound the color of VOLUME displayed on the screen
is red, after resuming the sound the color of VOLUME displayed on
the screen is green.
Use MUTE button.
Sound mute
Volume up/down
Setting up Stereo/SAP broadcasts
This TV can receive MTS stereo programs and any SAP
(Secondary Audio Program) that may accompany the stereo
program. This type of signal is available only from analog
channels.You can select Stereo or SAP only when the TV
station transmits these signals. Mono sound is automatically
received if the broadcast is only in monophonic. You can also
select MONO if you are having difficulty receiving a stereo
signal.
Press the MTS/SAP button repeatedly to select the MTS
mode.
MTS/SAP button