MartinLogan MAC 500/E - Manual (Page 13)

13 Control Panel
P e r s o n a l i t y s e t t i n g s
* Setting may be overridden via DMX. See the protocol for details.
Personality Path Options Effect (Default settings shaded.)
Pan/tilt speed P T S P
F A S T Optimize movement for speed*
S L O W Optimize movement for smoothness*
Pan/tilt swap P A T I / S W A P
O N Map DMX pan control to tilt channel and vice versa
O F F Normal pan and tilt control
Pan inverse PATI/PINV
O N Reverse DMX pan control, right Æ left
O F F Normal pan control, left Æ right
Tilt inverse PATI/TINV
O N Reverse DMX tilt control, down Æ up
O F F Normal tilt control, up Æ down
Fixture type S P E C / F T Y P
P R I S Operate with rotating prism
F R O S Operate with optional variable frost
Display on/off SPEC/dISP
O N Display stays on
O F F Display goes out 2 minutes after last key press
Display intensity SPEC/dINT 1 0 - 1 0 0 Adjust display intensity
DMX lamp off SPEC/dLOF
O N Enable DMX lamp off command
O F F Disable DMX lamp off command*
DMX reset SPEC/dRES
O N Enable DMX reset command
O F F Disable DMX reset command*
Automatic lamp on SPEC/ALON
O N Lamp strikes automatically within 90 seconds of power on
O F F Strike lamp from controller
Automatic protocol
detection
SPEC/AUTO
O N Enable automatic protocol detection
O F F Disable automatic protocol detection
Tracking algorithm SPEC/TRAC/MOdE
MOd1 Absolute delta value algorithm (for most controllers)
MOd2 Real delta value algorithm
Tracking samples SPEC/TRAC/CAL 1 - 1 0
Tracking mode sample level - default is 6. Higher levels give
smoother movement but slower acceleration.
Shortcuts SPEC/SCUT
O N
Color wheels and fixed-gobo wheel turn the shortest
direction*
O F F Wheels turn same direction*
DMX macros SPEC/dMAC
O N Enable DMX-selectable macros and pulsating effects
O F F Disable DMX-selectable macros and pulsating effects
Studio mode SPEC/MOdE
N O R M Optimize effects for speed
S T U d Optimize effects for silence
Fixed gobo mode SPEC/gMOd
F I X Static gobo wheel steps between full positions
S C R L Static gobo wheel scrolls continuously
Dimmer mode S P E C / d M O d
N O R M Normal dimming curve
T U N G Simulated tungsten dimming curve
Pan/tilt feedback SPEC/FEbA
ON Enable pan/tilt position correction system
OFF Disable pan/tilt feedback. Setting not saved
Effects feedback SPEC/EFFb
O N
Enable feedback from magnetic sensors on color
wheels, fixed-gobo wheel, and rotating-gobo index
O F F Disable feedback from magnetic sensors
Iris reflection reduc-
tion
SPEC/IRR
O N Iris opens 95 percent. Recommended for early units only
O F F Iris opens 100 percent