Rules for safe operation, Save these instructions – MTD hs720r User Manual

Page 4

Advertising
background image

RULES FOR SAFE OPERATION

4

WHILE OPERATING

• Keep bystanders, especially children and pets, at least

50 ft (15 m) away.

• Wear safety glasses or goggles that are marked as

meeting ANSI Z87.1 standards, and ear/hearing
protection when operating this unit. Wear a face or
dust mask if the operation is dusty.

• Wear heavy, long pants, boots, gloves and a long

sleeve shirt. Do not wear loose clothing, jewelry, short
pants, sandals or go barefoot. Secure hair above
shoulder level.

• Use the unit only in daylight or good artificial light.

• Use hedge trimmer properly. Only use this tool for the

purpose intended. Use only for trimming the type of
shrub, growth, etc., described in the operating
instructions.

• Do not force unit. It will do the job better and with less

likelihood of injury at a rate for which it was designed.

• Use extreme caution when reversing or pulling the unit

towards you.

• Do not overreach, take extra care when working on

steep slopes or inclines. Always keep proper footing
and balance.

• DO NOT stand on an unstable support. Do not use on

a ladder.

• Always hold the unit with both hands when operating.

Keep a firm grip on both the front and rear handle or
grips.

• Keep hands, face, and feet at a distance from all

moving parts. Do not touch or try to stop the blades
when they are moving.

CAUTION: Blades will coast after powerhead
is in the "off" position.

• Do not operate the engine faster than the speed

needed to do the job. Do not run the engine at high
speed when not in use.

• Always stop the engine/motor when operation is

delayed or when walking from one location to another.

• Stop the engine/motor for maintenance, repair, to

install or remove the blades. The unit must be stopped
and the blades no longer moving to avoid injury.

• Always wear heavy gloves when handling, removing,

installing or cleaning the blades.

• If you strike or become entangled with a foreign object,

stop the engine/motor immediately and check for
damage. Have any damage repaired before attempting
further operations.

• Stop the unit IMMEDIATELY if you feel excessive

vibration. Vibration is a sign of trouble. Inspect
thoroughly for loose nuts, bolts or damage before
continuing. Repair or replace affected parts as
necessary.

• Stop and switch the unit to off for maintenance, repair,

or for changing add-ons or other attachments.

• Maintain hedge trimmer with care. Keep blades sharp

at all times, and clean for best and safest performance.
Follow maintenance instructions. Always use a clean
cloth when cleaning. Never use brake fluid, gasoline,
petroleum-based products, or any strong solvents to
clean your unit.

• Use only genuine MTD replacement parts and

accessories for this unit. These are available from
your authorized service dealer. Use of any non-MTD
parts or accessories could lead to serious injury to the
user or damage to the unit, and void your warranty.

OTHER SAFETY WARNINGS

• Allow the unit to cool before storing or transporting. Be

sure to secure the unit while transporting.

• Store the unit in a locked up and dry or high and dry

place to prevent unauthorized use or damage, out of
the reach of children.

• Never douse or squirt the unit with water or any other

liquid. Keep handles dry, clean and free from debris.
Clean after each use.

• Keep these instructions. Refer to them often and use

them to instruct other users. If you loan someone this
unit, also loan them these instructions.

• Only qualified personnel should perform any repairs

or maintenance procedures that are not described
in this manual.

• Check engine mounting bolts and other bolts at

frequent intervals for proper tightness to be sure the
equipment is in safe working condition.

• Inside a building store the machine away from ignition

sources. Allow the engine to cool before storing in any
enclosure.

• Always refer to the Operator’s Manual instructions for

important details if the unit is to be stored for an
extended period.

• Do not attempt to repair the machine unless you have

the proper tools, and instructions for disassembly and
repair of the machine.

SAVE THESE INSTRUCTIONS

Advertising