Minolta Dimage V - Manual (Page 19)

FLASH MODES REMOVING IMAGE MEMORY CARDS
34 35
Turn the camera off.
Open the card/battery
chamber.
Pull the image memory
card straight out.
• To protect the contact area, store
the card in its anti-static case and
place it in its protective plastic
case.
Close the card/battery
chamber cover and slide it
shut until it clicks.
Always turn off the camera
before removing an image
memory card! Data on the card
will be lost or damaged if it is
removed while the camera is on.
The flash will fire in low light or backlit situations.
Use this mode for general photographic situations.
The flash will fire every time the shutter-release
button is pressed, regardless of lighting conditions.
Use this mode when there are harsh shadows on
the subject.
The flash will not fire. Use this mode when shooting
night street scenes, at dusk, or in places where
flash use is prohibited.
Auto Flash
Manual Fill Flash
Flash Cancel
Press the flash mode
button until the desired
icon appears on the LCD
monitor.
• The flash mode can only be changed in Record mode.
• The flash will not fire if the lens unit is not in the standard position
even if Manual Fill Flash ( ) is selected. When the lens is not in the
standard position,
will blink on the monitor.
In addition to Auto Flash mode ( ) the Dimâge V has Manual Fill
Flash mode ( ) and Flash Cancel mode ( ).