Configuring for tcp/ip in windows 2000 – Motorola SB4101 User Manual
Page 34
Advertising
27
X
Home
Exit
Introduction
Before You Begin
Installation
Configuration
Troubleshooting
Legal
Configuring for TCP/IP in Windows 2000
5
Click Properties and information similar to that shown in the lower window is
displayed.
6
If Internet Protocol (TCP/IP) is displayed in the list of network components, TCP/IP
is installed and you can proceed to step 10. If TCP/IP is not displayed on the list,
continue with step 7 by clicking Install. This causes the Select Network Component
Type window to be displayed as shown at the top of the next page.
Advertising