Motorola HT1250 - Manual (Page 40)

38
English
PH
O
N
E
MODIFYING THE PHONE LIST K
You can modify a phone list in three ways:
• Add an entry
• Delete an entry
• Edit an existing entry
The K symbol will appear on the LCD screen
when you are modifying the phone list.
Note: The radio cannot receive any calls while
you are modifying the phone list.
To Add an Entry (for full-keypad radios only):
5 Note: Press the PTT button, if required for your
radio.
Note: To redial the last number dialed (if not
using Speed Dial), press and release the
PTT button. The radio sends the last
number dialed.
– or–
If you entered your access code using the
keypad, press the
? key once to access
the last number dialed; then press and
release the PTT button.
6 Switch to the desired channel.
Hold the radio in a vertical
position with the microphone 1
to 2 inches (2.5 to 5 cm) away
from your mouth.
7 To end a phone call, do one of the following:
Enter the deaccess code using the keypad.
– or–
If your radio has the deaccess code prepro-
grammed, go to step 8.
8 Press the Phone button to exit Phone Mode.
– or–
8 ( to exit Phone Mode
and return to Phone .
– or–
Hold down ( to exit Menu Mode.
1 ) to enter Menu Mode.
2 + or ? until Program Lists
Phone
Program Lists
Phone.fm Page 38 Monday, September 30, 2002 2:10 PM