Magic Chef Vissani MCKC490S User Manual
Page 9
8
Coupler (Tapper, Tap)
The coupler is the part of the system that ‘taps’ the keg, and allows air in from the
regulator, and beer to flow up to the tower. Our unit comes with an American Sankey, or Style
‘D’ coupler. This will work with most domestic beers (i.e.: Miller, Bud, etc). For Imports and
specialty beers, other couplers are needed and can be obtained 3
rd
party, from companies like
Banner Beer.
Red Hose connects to the coupler to allow air in
Coupler locks into ‘neck’ of keg
Has a ‘Probe’ that actually breaks seal on keg
Handle pulls out and down, locks into place to tap keg
# 5 – also called pressure release valve. O-ring out of place can cause air leak
# 10 – Handle Assembly pulls out, then down to actuate the probe down into the keg,
then locks in place
#13 – Probe that actually goes down and breaks seal to tap keg
#14 & #15 – Ball and Retainer. Ball prevents backflow when keg is untapped, and
retainer both holds ball in place, and acts as a washer
Exploded Parts Diagram
Connects to Red Air
Hose. Air Enters
coupler.