Miele DA3190 - Manual (Page 31)

5. Install the front panel
if necessary
The installation kit DML 300 is
necessary. It can be obtained as an
optional accessory from Miele. The
installation kit has an installation manual
supplied.
^ The deflector can be adjusted up to
2" (50 mm) towards the front with the
two adjusting screws left and right in
the deflector. Adjust the deflector
until it is flush with the front of the
adjacent cabinetry.
6. Install the grease filter
^ Remove the protective film from the
grease filter frame.
^ To reinsert the grease filter, pull the
deflector out.
^ Make sure that the red plastic
guides are at the front and facing up.
^ Insert the grease filter into the
deflector, and push upwards. It
should glide onto the fixing pins.
Installation
31