Memorex MPH2089 - Manual (Page 9)

OPERATION (CONTINUED)
8
Press and hold the SKIP❿❿/OGM
button for approximately 2 seconds
until a short beep is heard, and then
release the button. Begin recording
your outgoing message speaking in a
normal tone of voice.
Typical Message: “You have reached
the Smith residence. We are not able
to come to the phone right now. If
you’ll leave your name, phone number
and a brief message after the beep,
we will call you back.”
1
When finished recording, press the
PLAY/STOP button ❶. The newly
recorded outgoing message will then
play once. Make sure the VOLUME
control ❷ is at a desirable level.
To record a new outgoing message,
please repeat steps 1 and 2.
2
1
2
RECORDING OGM (OUTGOING MESSAGE )
Recording an OGM allows the caller to hear the OGM and then be able to leave a
message. Please note that there is an automatic message on this unit, recording
a new OGM will disable this default message.
NOTES:
•
If an invalid OGM is left, the unit will revert back to the default OGM.
• Make sure to raise the SPEAKER VOLUME when setting the OGM.
• TO REVERT BACK TO THE DEFAULT OGM: While in the Power Off or Play
OGM mode, press the DELETE button.
Press and release the SKIP❿❿/OGM
button and the selected Outgoing
Message will play.
1
VERIFYING THE OUTGOING MESSAGE
MPH2089 O/M.QXD 9/4/01 10:30 AM Page 8