Metz Astral-72 MF - Manual (Page 35)

35
Call the menu
20. Special functions
Picture format
Calling the picture format function:
• If "F1" is already programmed with the function
"Picture format ", briefly press the "F1" key;
otherwise, hold the "F1" key depressed until
"Special functions 1" is displayed and then press
the ቤ key and select the desired picture format.
• You can use the "P+/P-" rocker key to select the
various functions. You can also set the zoom
factor for the selected picture format within the
next five seconds.
• The settings made here (except for the
automatic zoom in the TV menu)
remain stored until you switch to anot-
her programme position or switch off
the TV set.
Zoom
After selecting the "Zoom" function, you
can adjust the zoom factor with the - +
key.
In addition to adjusting the zoom factor, you
can move the picture up or down on the
screen so that, for example, the station logo
or subtitles remain visible. To do this, press
the F1 key and then the ብ key and move the picture
with the "P+/P-" rocker key.
Standard 4:3
This is the standard setting for all programmes
with the aspect ratio 4:3.
Panorama*
With the Panorama function, you can adjust the
picture of a programme in 4:3 aspect ratio to fill
the 16:9 format of the screen (only on sets with
16:9 screen). The picture is expanded uniformly in
the horizontal direction. You can also zoom the
picture. The Panorama function can be switched
on and off in the menu "Picture and Sound" under
the heading "Picture settings, general".
16:9 full screen
This function is used to display the picture format
of external devices (such as 16:9 video recorders)
with the correct aspect ratio.
F1
3
Special
Functions 1
PIP on
9-programme on
Picture format
ᕡ
ᕢ
ᕣ