Preparation, Rear panel, Installing the batteries for the remote control – Philips Magnavox DV220MW9 User Manual

Page 9

Advertising
background image

PRECAUTIONS

PREPARATION

ADVANCED PLAYBACK

BASIC OPERATIONS

RECORDING

OPTIONAL SETTINGS

TROUBLESHOOTING

INFORMATION

EN

EN

9

PREPARATION

1. DVD/VCR AUDIO OUT jack ¬p.10

Connect an RCA audio cable from here to the audio
input jack of your television or audio device. Standard
connection for DVD/VCR use.

2. VCR AUDIO IN jack ¬p.22

Connect an RCA audio cable from the audio output
jack of your camcorder, VCR, etc. to here.

3. DIGITAL AUDIO OUT COAXIAL* jack ¬p.12

Connect a digital audio coaxial cable from here
to the digital audio coaxial in jack of a decoder or
audio receiver.

4. DVD AUDIO OUT* (analog) jack ¬p.11

Connect an RCA audio cable from here to the audio
input jack of your television or audio device.

5. S-VIDEO OUT* jack ¬p.11

Connect an S-video cable from here to the S-video
input jack of your television.

6. COMPONENT VIDEO OUT* jack ¬p.11

Connect component video cables from here to the
component video input jacks of your television.

•

•

•

•

•

•

7. DVD/VCR VIDEO OUT jack ¬p.10

Connect an RCA video cable from here to the
VIDEO input jack of your television or audio device.
Standard connection for DVD/VCR use.

8. VCR VIDEO IN jack ¬p.22

Connect an RCA video cable from here to the video
output jack of your camcorder, VCR, etc.

* For enhanced DVD viewing. DVD/VCR video and audio

connection required to view cassette tapes.

Note:

RCA audio and video cables are included for
both VCR and DVD viewing. You can enhance
your DVD picture and sound quality with an
S-video cable, component video cables, or a
digital audio coaxial cable. Please purchase
the necessary cables at your local store.

(Refer to pages 11-12.)

•

•

•

Rear Panel

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

VCR

DVD/VCR

S-VIDEO

OUT

COMPONENT

VIDEO OUT

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

L

L

Y

R

R

C

B

C

R

3

5

4

6 7 8

L1

1

2

Install the batteries (AA x 2) matching the polarity
indicated inside battery compartment of the remote
control.

Keep the following in mind when using the remote
control:

Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
The maximum operable ranges of the unit are:
- Line of sight: approx. 23 feet (7m)
- Either side of center:

approx. 16 feet (5m) within 30°

- Above:

approx. 16 feet (5m) within 15°

- Below:

approx. 10 feet (3m) within 30°

•

•

16 feet (5m)

30˚

30˚

16 feet (5m)

23 feet (7m)

Caution: Never throw batteries into a fire.

Note:

Do not mix different types of batteries together
(e.g., Alkaline and Carbon-Zinc) or old batteries
with fresh ones. Although they may look similar,
different batteries may have different voltages.
If the remote control is not to be used for a long
period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
Do not try to recharge batteries; they can

overheat and rupture.
Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.

•

•

•

•

Installing the Batteries for the Remote Control

E8K6SUD_DV200MW9_v1.indd 9

E8K6SUD_DV200MW9_v1.indd 9

2007/12/25 10:30:26

2007/12/25 10:30:26

Advertising