Attaching/removing the lens – Mamiya 645 AF User Manual
Page 9
Attaching/Removing the Lens
Attaching
1. Remove the camera's lens opening
cap, just like you would remove a
lens, by pushing the lens release
button “A”
backward and then turn
the lens cap or the lens itself
counter clockwise and lift out.
To remove the front lens cap, squeeze the shiny
sections together and lift out.
To remove rear lens cap turn it counter clockwise.
2. Attaching the lens
Align the red alignment dot of the lens (on the
shiny flange) with the camera's red dot, fit the
lens into the camera and rotate it clockwise until
it clicks into place.
*Do not touch the distance ring or other
rotating parts during the auto focus
operation.
Removing
While pushing the lens release button “A”
,
rotate
the lens counter clockwise until it stops and lift it
off.
*After removing the lens from the camera body, protect both ends by attaching
the caps.
*Oil, dust, fingerprints or water on the electronic contacts could result in
malfunction or corrosion. Wipe such impurities off with a clean piece of cloth.
15
16