MITSUBISHI ELECTRIC SD200U - Manual (Page 15)

EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select the INSTALLA-
TION menu.
3. Press the ENTER button (or
} button).
4. Press the
{ or } button to select AUTO POWER
OFF.
5. Press the $ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, turn off the
main power, wait about 10 minutes, and turn on the
main power again.
• The settings with mark, you should press the
ENTER button after selecting.
Menu operation
opt.
IMAGE
TV60
opt.
INSTALLATION
TV60
opt.
INSTALLATION
TV60
AUTO POWER
ON
AUTO POWER
OFF
OFF
OFF
AUTO POWER
ON
AUTO POWER
OFF
OFF
OFF
AUTO POWER
ON
AUTO POWER
OFF
OFF
30min
IMAGE CONTRAST ± 20
BRIGHTNESS ± 20
sRGB ON, OFF
VIDEO COLOR MATRIX
COLOR
± 10 TINT
± 10
SHARPNESS ± 5
RED
±
30
CYAN ± 30
GREEN ± 30
YELLOW ± 30
BLUE ± 30
MAGENTA
SATURATION
± 30
± 10
CONTRAST R ± 15
CONTRAST B ± 15
BRIGHTNESS R
±
15
BRIGHTNESS B ± 15
EXPAND MODE EXPAND, REAL
UPPER LEFT, LOWER RIGHT
INSTALLATION
IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
AUTO POWER ON ON, OFF
ON, OFF
AUTO POWER OFF
1 - 4
FEATURE MENU POSITION
OFF, 5, 10, 15, 30, 60 min
SPLASH SCREEN
BLUE, BLACK BACK COLOR
VIDEO SIGNAL
VIDEO MODE
AUTO, OFF CINEMA MODE
AUTO, NTSC, PAL, SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60
LANGUAGE
RESET ALL
SIGNAL HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
TRACKING 0 - 9999
COMPUTER INPUT
USER
ON
OFF
CLAMP POSITION 0 - 127
CLAMP WIDTH 0 - 63
SHUTTER (L) 0 - 20
0 - 20
0 - 20
SHUTTER (U) 0 - 20
VERT.SYNC AUTO, OFF
COMPUTER
USER
OFF
STANDARD
LOW
COLOR TEMP
USER
*3
*3
*3
*3
*4
*4
FINE SYNC. 0 - 31 *4
*4
*4
*4
*1
*2,*5
*5
*5
*5
*5,*6
*5
*3
HOLD
OK
BEGIN 0 - 15
END 0 - 15
ANAMORPHIC
RGB, YC B C R / YP B P R
* 1: The item can not be selected when the sRGB is set to ON.
* 2: The item can not be selected with certain signals.
* 3: Setting range is different with certain signals.
* 4: The item can not be selected when the source is selected
VIDEO or S-VIDEO.
* 5: The item can not be selected when the source is selected
to COMPUTER.
* 6: The item can not be selected when the VIDEO MODE is
not set to 1.
, English, Español, Deutsch, Français, Italiano,
SHUTTER (RS)
SHUTTER (LS)
OK
ON, OFF
HIGH