Minolta CN3101e - Manual (Page 64)

6. Printing
55
6.7 Effecting Staple
The Staple function can be used only when the copier is equipped with the Finisher
FN-8 or FN-116.
1. Select the “Setup” tab.
2. Clicking “Detail of Output Setting” will open a dialog box for setting details.
Make the following settings in the “Staple” column.
• If FN-8 is mounted:
OFF, Corner, Top Side 2 Points, Left Side 2 Points, Auto 2 Points
• If FN-116 is mounted:
OFF, Corner
NOTE
• When the FN-116 is mounted, stapling can be made up to 30 sheets of paper.
• When the FN-8 is mounted, stapling can be made up to 50 sheets of A4
lengthwise (Letter lengthwise) paper or 25 sheets of B4 lengthwise (Legal
lengthwise) paper.