Philips Magnavox 15MF400T/37 - Manual (Page 15)

15
1 Press ” MENU’’ key to open OSD menu
2 Press > or < key to select “TV Setup’’ option
3 Press o r key to select submenu
Note: Air/Cable, Auto Scan, Current Program Sleep Timer options can only display on
TV Source
TV CHANNEL INSTALLATION
Air/Cable
1. Press ” MENU’’ key to open OSD menu
2. Press > or < key to select “TV Setup’’ option
3. Press or key to select “AIR/CATV” option
4. Press > or < key to select the automatic search system that your TV need, there are four options:
CATV: Community Antenna Television
AIR: Over the Air
HRC: Harmonically Related Carrier
IRC: Incrementally Related Carrier
5. Press “MENU” key to exit AIR/CATV menu or press or key to adjust other options
Note: Please run the auto scan function to setup the TV for the broadcast or cable channels available in
your area. If you do not run the auto scan function to setup the channels, your television may not operate
properly.
Auto scan
Channel auto search and memorize all viewable channel.
1. Press “MENU’’ key to open OSD menu
2. Press > or < key to select “TV Setup’’ option
3. Press or key to select “Auto scan” option
4. Press > or < key to start auto scan.
Note: Please run the auto scan function to setup the TV for the broadcast or cable channels available in
your area. If you do not run the auto scan function to setup the channels, your television may not operate
properly.
TV SETUP MENU
Û²º±½«- ͱº¬©¿®» у Э«-¬±³»® Н«°°±®¬