McIntosh XCS1K - Manual (Page 5)

5
Introduction and Performance Features
Performance Features
Figure 8
Figure 7
Figure 6
• Patented LD/HP Technology
The McIntosh Low Frequency Loudspeaker Elements
feature the patented LD/HP Magnetic Circuit Design.
This design, when compared to conventional Loudspeaker
Elements, reduces distortion significantly. It also increases
power handling and efficiency.
• Neodymium-Iron-Boron Alloy Magnets
The 32 two inch Midranges and 20 three-quarter inch
Dome Tweeters all use this Alloy. The Neodymium-
Iron-Boron Alloy has the highest flux density per unit
of volume. The smaller overall size of the Midrange and
Tweeter Loudspeakers allows for closer spacing and results
in improved sound reproduction.
• Low Harmonic and Intermodulation Distortion
The XCS1K Loudspeaker System is capable of reproducing
the full dynamic range of a symphony orchestra with very
low audible distortion of any kind.
• High Power Handling
The Loudspeaker Elements and Crossover Components of
the XCS1K are all chosen for use with powerful amplifiers
up to 1,200 watts.
• Superior Imaging
Locating the Tweeters between the two rows of Midranges
generates a symmetrical response for superior imaging.
• Versatile Operation and Placement
In addition to the regular connections, the XCS1K Loud-
speaker System provides separate connections for Bi-Am-
plification and Tri-Amplification hookups.
• Extruded Column
The top, bottom and rear of the XCS1K Low Frequency
enclosure is extruded thick aluminum construction with
non-parallel internal sides and is given a High Gloss Black
Piano Type Finish.
• Gold Plated Input Connectors
The XCS1K input connectors are gold plated for superior
corrosion resistance and high electrical conductivity.