Mitel 5055 - Manual (Page 33)

5055 SIP Phone Features
- 27 -
4. Click Dial. The address is dialed (in handsfree mode) on the next available Line key
(Line 1 if all lines are free).
• If you want to use the handset or headset, lift the handset or press the Headset key
before clicking “Dial” in the Web Configuration Tool.
• If you want to use another line than Line 1, press the desired line key on the SIP
Phone before clicking “Dial” in the Web Configuration Tool.
Redial
Redial calls back the last party you dialed using the SIP Phone or the Web Configuration
Tool.
Note: Your SIP Phone will not remember the last call dialed if it loses power.
1. Get a dial tone (see Making Calls on page 14).
2. Press the Redial key. The last number/name/address you called (or tried calling) is
dialed.
Note: Pressing the Redial key without lifting the handset will automatically put you in
handsfree (speaker) mode.
Ringer Pitch and Volume
You can change the ringer volume using the SIP Phone Menu Interface, or by pressing the
▼ or ▲ key on the SIP Phone while the phone is ringing (one key press per level). You can
also change the pitch of the ringer by using the SIP Phone Menu Interface.
Note: The ringer settings are specific to the SIP Phone, not to user profiles. You cannot
change your ringer settings while on a call.
1. Press the Menu key.
2. Press the >> softkey until “PHONE SETTINGS?” appears, and press the OK softkey.
3. Press
4. “SET RINGER VOLUME?” is displayed.
• If you don’t want to change the ringer volume, press the No softkey and go to step 7.
• If you want to change the ringer volume, press the Yes softkey and continue below.
5. The phone starts ringing. Use the ▼ or ▲ key to adjust the volume to the desired level
(one key press per level), and press the Submit softkey.
6. “SET RINGER VOLUME?” is displayed. Press the No softkey.
7. “SET RINGER PITCH?” is displayed.
• If you don’t want to change the ringer pitch, press the No softkey to return to the
Phone Settings menu, or the Menu key to return to the default display.
• If you want to change the ringer pitch, press the Yes softkey and continue below.
8. The phone starts ringing. Use the ▼ or ▲ key to adjust the pitch to the desired level
(one key press per level), and press the Submit softkey.
9. “SET RINGER PITCH?” is displayed. Press the No softkey to return to the Phone
Settings menu, or the Menu key to return to the default display.