Marantz ES7001 - Manual (Page 19)

17
ENGLISH
SETTING THE NUMBER
OF AUDIENCE
• This item is used to set whether you view/
listen to the source input to this unit alone
or with multiple persons in a room.
• Press the SEAT button on the remote
controller to switch to “2 or more persons.”
• This item is set to “2 or more persons” at
the factory.
SEAT button
SETTINGS
The following setting items are available with
this unit.
• Setting Installation Height of Speakers
(page 17)
• Setting the number of audience (page 17)
• Setting the viewing/listening distance
(page 18)
• Setting the subwoofer output (page 18)
• Setting the binaural mode (page 19)
• Setting the Dolby Pro Logic II (page 19)
• Mode setting multi-channel TV sound
mode (page 20)
• Setting the night mode (page 20)
• Setting the dimmer (page 20)
• Resetting Items to factory preset settings
(page 21)
SETTING INSTALLATION
HEIGHT OF SPEAKERS
• This item is used to set the installation
location (height) of the unit.
• Press the ELEVATION button on the remote
controller to change the setting.
• Each time the button is pressed, the setting
switches as described below.
• This item is set at the factory as if the unit is
installed in a lower place than the connected
TV (mounted on the upper shelf of the
optional RM7001 AV).
Mounted in the RM7001 rack
Installed in a higher place than the TV
ELEVATION
button
¶
When the unit is mounted in the
RM7001 rack
¶
When the unit is installed in a
higher place than the connected TV
¶
When audience is one person
ES7001
¶
When audience is two or more
persons
ES7001 ES7001
Note:
When there is a large audience, try both
settings and select the setting which gives
a better stereophonic effect.