Motorola DVD User Manual

Page 35

Advertising
background image

30

C h a p t e r 3

A d d i t i o n a l S e t u p E x a m p l e s

displayed. Tune your TV to channel 3 or 4, depending on how you set the channel 3/4
switch on your VCR.

To connect a video camera (not shown):

1. If you don’t have any device connected to the Recorder’s Audio/Video Input 2, skip

to the next step. If you normally have a VCR connected to the Audio/Video Input 2
connector, you will have to disconnect it temporarily. Remove the Composite A/V
cable from the VCR’s Audio/Video Output. You can use this same cable to connect
your video camera, since it is already connected to the Recorder’s Audio/Video
Input 2

.

2. Connect a Composite A/V cable from the Audio/Video Output connector on the video

camera to the Audio/Video Input 2 connector on the Recorder. This will allow you to
transfer recordings from a video camera to the Recorder (so you can turn your home
videos into DVDs). See Chapter 3, “Playing and Recording Programs” in the User’s
Guide
for details.

Advertising