Printing a delayed command list, Printing a stored document – Muratec MFX-1300/1700 User Manual
Page 39
2.8
Basic operation
3
If you want to cancel the command shown, press
C A N C E L
.The
LCD
shows:
4
To go ahead with canceling the command, press
C A N C E L
again. Go back to step 2
to view other delayed commands.
To keep this command but to continue reviewing stored commands, press
or
.Go back to step 2.
To keep this command and stop reviewing commands, press
STO P
to return your
machine to standby mode.
Note:
See also Reviewing or canceling parts of a broadcast, below.
Reviewing or canceling parts of a broadcast
You also can review or cancel certain numbers within a broadcast:
1
Press
C O M M
.
C A N C E L
/
CONFIRM
.
2
Press
or
to scroll through currently stored broadcast command.
Note:
Stop this operation at any time by pressing
STO P
.
3
If you want to cancel the command shown, press
C A N C E L
,
C A N C E L
.
If you want to review individual numbers within this broadcast, go on to
step 4 without pressing
C A N C E L
.
4
To review individual numbers within this broadcast, press
(or
B R O A D C A S T
)to
see the first number.
The
LCD
shows:
5
Press or
until you find the number you want to cancel.
6
Press
C A N C E L
,
C A N C E L
.The next number will appear.
If you want to cancel this number, also, repeat this step.
If you want to cancel a different number, go back to step 5.
If you want to go back to reviewing or canceling other command, press
.
If you don t want to cancel any more numbers, press
STO P
.
The machine returns
to standby mode.
Printing a delayed command list
Your machine can print a command list which tells you:
The command s identification number
The phone number, or remote location
The start time (this appears in a
D D
,
H H
:
M M
format)
A note telling if the command is a polling or F-Code operation (see pages 3.14 3.15
for more on polling and 3.25 3.34 for more on F-Code communication)
.
To print a delayed command list, press Program key,
E
, 1, 0, 5
ENTER
.
Printing a stored document
Your fax machine can print out each document stored for delayed transmission.
To print a stored document, you ll need to know the document s command number,
which you can get by either reviewing the commands or printing a delayed command
list (see above).
1
Press Program key,
D
, 3, 0, 5
ENTER
.The
LCD
shows:
2
Use the numeric keypad to enter the command s identification number,
1 99. For
example, we could enter the following for the very first command, 1:
3
Press
ENTER
.
Your fax machine will print a copy of the stored document.
Com. Stored Doc.
Command No. :1_
Com. Stored Doc.
Command No. :_
9-5550388
/
/
/Cancel
C01:Broadcast
/
/
/Cancel
C01:9-5552311
Check
/
/
/Cancel