Marshall electronic V-R653-IMD-TE - Manual (Page 26)

26
Specifications
■ PANEL
Screen Size 6.5” Diagonal
Display Area (h x v) 132.096 x 99.072 mm
Aspect Ratio 4:3 Native (4:3/16:9 Modes)
Pixels 1024 x RGB x 768
Color Depth 18-bit (262,144 Colors)
Viewing Angle (h x v) 160° x 140°
Brightness 500 cd/m
2
Contrast Ratio 500:1
Dot Pitch (h x v) 0.043 x 0.129 mm
Pixel Pitch (h x v) 0.129 x 0.129 mm
■ VIDEO INPUT/OUTPUT
HD-SDI Input / Output
Supports ITU-R BT.656, SMPTE 259M, 292M, 274M
■ CONNECTORS
Video Input
1 x BNC Female (75 Ω )
Video Output (Active Loop-Through)
1 x BNC Female (75 Ω )
Power Input
2-Pin Twist Lock Connector
Tally Hardware Interface
HD-15 Female
RS-422/485 Interface
2 x RJ12 (Modular 6P6C)
■ TALLY HARDWARE INTERFACE (HD-15)
Activation requires contact closure of pin to ground on the
HD-15 connector:
Pin No. Signal
1 Monitor 1 Green
2 Monitor 1 Red
3 Monitor 1 Yellow (OSD tally only)
4 Ground
5 Ground
6 Monitor 2 Green
7 Monitor 2 Red
8 Monitor 2 Yellow (OSD tally only)
9 N/C
10 N/C
11 Monitor 3 Green
12 Monitor 3 Red
13 Monitor 3 Yellow (OSD tally only)
14 Ground
15 Ground
■ RS-422/485 SERIAL INTERFACE (RJ12)
Protocols: Image Video, TSL v4.0, Marshall
Pin No. Signal
1 Tx-
2 Ground
3 Rx+ (Receive from host)
4 Rx- (Receive from host)
5 N/C
6 Tx+
■ ELECTRICAL
Power Consumption 6.0A @ 12VDC (72 W)
Voltage Requirement 12 VDC
V-PS12-6.6A Power Supply:
Input 100V-240V, 2.5A, 50-60Hz
Output 12-17VDC, 6.6A, 80W Max
■ MECHANICAL
Dimensions (w x h x d): 19” x 5.3” x 2.6”
Rack Height: 3RU
Weight (Monitor Only): 5.45 lbs
Operating Temperature 32°F to 120°F (0°C to 50 °C)
Storage Temperature -4°F to120°F (-20°C to 50°C)
Compliance Π, FCC-Class A, ANSI-63.4
(Certificates on file)
RoHs Do not dispose. Return to
Manufacturer or Authorized
Recycle Facility.