Philips Magnavox MDV434 - Manual (Page 22)

English
22
DVD Setup Menu Options
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU .
Audio Setup Menu
1
In disc mode, press SYSTEM MENU.
2
Press
1 2 to select ‘Audio Setup’ icon.
3
Press OK to confirm.
General Audio VideoPreference
Downmix
Digital Audio
CD Upsampling
- - Speaker Setup Page - -
Setting the Downmix
This options allows you to set the stereo
analog output of your DVD Player.
1
In ‘AUDIO SETUP PAGE’, press
3 4 to
highlight {DOWNMIX}, then press
2.
STEREO
Select this to change channel output to
stereo which delivers sound from only the
two front speakers.
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro-Logic decoder.
2
Press
3 4 to select a setting, then press
OK to confirm your selection.
Digital Audio Setup
The options included in Digital Audio
Setup are: ‘Digital Output’ and ‘LPCM’.
1
In ‘AUDIO SETUP PAGE’, press
3 4 to
highlight {DIGITAL AUDIO}, then press
2.
2
Press the 3 4 keys to highlight an option.
3
Enter its submenu by pressing
2.
4
Move the cursor by pressing the
3 4
keys to highlight the selected item.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
SPDIF Off: Turn off the digital output.
➜ All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful Hints:
–
If DIGITAL OUTPUT is set to ‘All’, all
audio settings except MUTE are invalid.
01-31 MDV434_LA_552a 02/03/05, 5:28 PM 22